pac

Logo_2_whitei
Menu

coverdrive2 Partial Kit

$145.95 Ex. Tax

This kit will include the following parts to complete the controller:

1  ESP32 microcontroller loaded with coverdrive firmware
1  2.8 TFT SPI 240×320 touch display
2  Level shifters
4  2.54mm 6 pin headers
4  2.54mm 6 pin connector strips
1  7805 Voltage regulator – power circuit
1  1N5820 diode – Power circuit
2  100uF capacitors – Power circuit
1  green – power LED
2  4.7nF capacitors – SWR circuit
2  22K resistors – SWR circuit
2  18K resistors – SWR circuit
1  yellow – LED stepper active status
3  2 pin 2.54mm connectors
1  6 pin 2.54mm connector – stepper connection
1  3 pin 2.54mm connector –  SWR bridge connection
1  4 pin 2.54mm connector Encoder connection
1 14 pin (long) connector – PCB to display
1  Push button
1  Heatsink
1  2.54mm 12 pin header strip
1  Rocker switch

Categories: ,

These are the parts needed to complete the a functional coverdrive controller:

– NEMA17, or NEMA23 Stepper motor.
– A Closed Loop controller board for the appropriate stepper motor.
The closed loop controller board will have the stepper driver included.
– Rotary Encoder (Oak/Grigsby Rotary Encoder – 128 PPR channels)
– SWR bridge ( this can be purchase from Amazon.com, or AliExpress.com )
– A 82.5mm L x 41.6mm W x 56.92mm H aluminum box to house the small SWR bridge board.
– 3D printed case to house the controller.


Related products

Shopping Cart