COVERDRIVE v1.00 - FIRMWARE DISTRIBUTION

FULL INSTALL - NEW / REPLACEMENT ESP32
Run: install.bat
This erases the ESP32 and installs the supplied bootloader, partition table,
and Coverdrive firmware. Existing controller configuration is erased.

FIRMWARE UPDATE - EXISTING COVERDRIVE CONTROLLER
Run: flash_firmware.bat
This backs up the controller NVS configuration, updates firmware.bin, then
restores the configuration.

IMPORTANT
- Keep all files together in this folder.
- Connect the ESP32 to the Windows PC by USB.
- Find the controller COM port in Windows Device Manager.
- Do not disconnect USB or remove power while flashing.

See Coverdrive_01_Firmware_Installation_v1.00.pdf for the complete short HOWTO.
